The use of rice transplanter operation and maintenance - next

Release time:

2023-03-02 14:16

Third, the

maintenance of rice transplanter The rice transplanter should be maintained on time, which is an important link to extend the service life of the machine, reduce failures, and keep the machine in good working condition. The rice transplanter is limited by the agricultural season, and the working time is short and the parking time is long in the year, so it should be properly stored during the non-operation period.

1. The outside should be cleaned. After all the rice transplanter operations are completed, the whole machine should be scrubbed, first rinse the soil on the machine with clean water, and then dry the machine with a dry towel to prevent the machine from rusting.

2. Put clean fuel oil and oil; Remove the V-belt and store separately.

3. Keeping the machine in good condition is an important link to extend the service life of the machine and reduce failures, so it is necessary to fill the oil on time according to the quality and quantity. After the new machine works for 2 hectares, the oil of the diesel engine should be changed, and after the old oil is released, it will be changed once a season in the future.

4. Closed cylinder. Add a small amount of waterless oil to the intake duct, rotate the crankshaft, and attach the oil to the top of the piston, the inner wall of the cylinder liner and the valve seat to seal the cylinder.

5. To clean the filter element of the diesel tank, first remove the diesel tank to release the diesel, take out the filter element

and clean it in the diesel, and then load the cleaned filter element into the fuel tank.

6. All the working springs on the transplanter should be in a free state, and when stored, the planting arm pusher spring should make the pusher in the state of pushing, in order to prevent failure due to spring fatigue when reused. Place the clutch and positioning clutch in the "closed" position, the gear lever in the neutral position, and the rice box in the middle position. It is best to store it indoors or in a simple shed, and it is not allowed to pile debris on the machine.

7. Check the left and right chain boxes and planting arm oil

once a day during operation, and add the chain box until the chain hangs oil, and the planting arm is added until there is oil at the fork. Open the planting arm to add gum oil to the oil injection competition site, and check it once a day during the operation.

8. When the transplanter is stored for a long time, it is best to put it in the warehouse, and put all gears in the neutral position.

Related news


On the morning of December 8, Vice Mayor Li Ming and his entourage arrived at Dongfeng Asset Management Co., Ltd. and held a discussion with Dongfeng Asset Management leaders.

Working process and principle of rice transplanter

The working process of rice transplanter varies due to different structures, but the basic process is roughly the same. Its principle of "group successive grid to take seedlings and directly plant" is: the seedlings are neatly put into the rice box in the group state, and move laterally with the rice box, so that the rice taker takes away a certain number of seedlings in separate compartments, and under the action of the transplanting trajectory control mechanism, the seedlings are inserted into the soil according to agronomic requirements, and the rice taker is then returned to the rice box according to a certain trajectory to take the seedlings.

How to plant rice with rice machinery?

With the rapid promotion of mechanized agricultural production, many farmers can enjoy the convenience brought by mechanical planting. As far as the most common rice planting in China is concerned, rice machine transplanting has become the main transplanting method for most large planters, but often cannot grasp the relevant technical points when using rice machine transplanting, resulting in slow rejuvenation of rice and prolonged growth period. Let's learn the key points of rice transplanting technology in the rice machine.

The use, operation and maintenance of rice transplanter - on

In recent years, large-scale agricultural machinery has played a great role in agricultural production and is favored by farmers, but through observation, it is found that many operators only pay attention to the use of the machine insertion season, and ignore the maintenance inspection and maintenance links after insertion, so that the tools often have some problems, affect normal operation, delay work to reduce efficiency, and cause adverse effects on the promotion of rice machine insertion. How to keep the machine in good technical condition and give full play to the work efficiency of the machine is the key point for the success of the promotion and development of rice machine insertion technology.

Intelligent agricultural machinery · intelligent agriculture

Service hotline

+86 4007500988

Contact information

Address: No. 1105, North Section of Hongye Avenue, Xuyang, Chongzhou, Sichuan
Fax: 0288215113

COPYRIGHT © 2023 Sichuan Gangyi Technology Group Co., Ltd

QR code

Follow us